What is the best surface for a riding arena?

Riding arena surfaces should contain Cleaned and screened, medium to coarse, hard, sharp sand. Fine sand will break down more readily into small enough particles to be lofted as dust. “Cleaned” means the material has been washed of silt and clay, making the sand less compactable and less dusty.

Sand is a great choice for horse arenas Because it can be combined with topsoil, wood chips, rubber, and other materials to create the ideal surface. For example, topsoil or wood can be combined with our sand to improve moisture retention. Rubber can be added to increase padding for horse hooves.

They need a base, and Sand, ideally silica sand, is best. Finally, rubber is probably the most comfortable surface to fall off on to. Best for: outdoor arenas, particularly for jumping, since it is less likely to result in skidding when horses land or concussion injuries.

The depth of arena footing sand depends on the sand quality and the riding discipline. Usually, 3-4 inches of a fine sand is used for dressage and jumping arenas with a geotextile sand additive. For plain sand arenas, 2-3 inches of a fine sand is recommended.

A standard size horse arena will need anywhere from 50 to 300 tons Of sand. The biggest determining factor is the dimensions, or size, of the arena and the depth of the footing. Many styles of riding only need 2 to 4 inches of footing for their arena while some need more than 8 inches of depth.

Effective Dust Control for Cleaner, Safer Arenas. ArenaKleen^® Works very well with all types of riding arena footing such as sand, stone dust, finely processed screened gravel, and all of the various blends that include the previous as well as many of the fiber products such as rubber, leather, wood, and blends.

To develop an effective sub-base, we will need to Excavate at least six inches of soil, leaving the area where you will put your arena several inches below the rest of the ground. This process is often referred to as boxing out. This sub-base typically goes on top of compacted soil from the site.

To develop an effective sub-base, we will need to Excavate at least six inches of soil, leaving the area where you will put your arena several inches below the rest of the ground. This process is often referred to as boxing out. This sub-base typically goes on top of compacted soil from the site.

Any loose stone surface, even rounded pea gravel, may be uncomfortable for horses. Loose stones may also become wedged between the shoe and the sole, exerting painful pressure on the underlying tissues.

Sand. The most common primary footing material for a dressage arena — and really any indoor or outdoor arena — is sand. Because it is so affordable, arena owners can keep costs low by integrating sand in their arena footing.

Sand. To get decent footing for your arena, you can expect to spend around $1 to $2 per square foot. Sand footing is probably the most common and diverse of these materials and most arenas are going to have some sand included in their footing composition.

A competition sized standard dressage arena is 20 meters by 60 meters (12,915 square feet) While a jumping arena may need to be 100′ by 200′ (20,000 square feet) to accommodate a full course.

How much does it cost to build an outdoor riding arena UK? The average cost to build an outdoor menage in the UK is Around £30,000. This is assuming your arena is around 40x20m in size (the most popular outdoor arena size in the UK).

Equestrian Sand™

Silica sand is An ideal base for an additional surface topping. It is crucial to select the correct sand for successful horse riding surfaces. If the incorrect sand is used in the surfacing of arenas and gallops it can cause a very ‘deep’ ride and more often than not has to be removed and replaced.

New arenas may need either fine or coarse sand. So, there is not one size fits all sand for horse arenas. Masonry Sand, Concrete Sand, River Sand, and Manufactured Sand (m10s) can all work But you need to start with a basic knowledge of what type will work best for your project.

Choose a Heavier, round, sand. Do not use fine or dusty sand like the type used to make concrete. Gravel paddocks make life easier in the wet Northwest, but horses should never be fed on gravel as they can ingest it leading to colic or tooth damage.

Silica sand Is commonly used for horse arenas due to the hardness of the sand particle. It is a natural sand that resists weather and breakdown due to the hardness so lasts longer as an arena or track footing. The sub-angular sand particles will lessen the ability to compact and provide traction under hoof.

Clay-based soil is ideal if it is leveled and compacted. Clay may need to be brought in to provide a good subbase if the regional soil is too sandy or silty. Putting a slight crown on the subbase (raising the center an inch or two and sloping toward the sides) will help water drain away from the arena.

Sand. To get decent footing for your arena, you can expect to spend around $1 to $2 per square foot. Sand footing is probably the most common and diverse of these materials and most arenas are going to have some sand included in their footing composition.