How does a safe combination lock work?

Each disc has a notch in it called a gate. When you pull down on the handle, a rod (sometimes called the fence) hits the three dials. If the three gates are lined up correctly, the rod slides into the notches. This allows the handle to travel far enough to disengage the lock on the door, and the safe can be opened.

The combination is made up of three numbers – When entering your combination, you must enter the numbers in the order shown on the combination tag. stop when the first number lines up with the indicator. the first number, and stop when the second number lines up with the indicator.

To open a safe with a 3 wheel combination, start by turning the dial to the left past the first number 3 times before stopping on that number. Once you line the first number up with the marker at the top of the dial, turn the dial to the right past the second number 2 times.

Opening a Safe Without the Combination

1. First you must find the safe’s emergency key. …
2. Remove the panel that covers your safe’s dial. …
3. Once you have removed the dial panel, take a look beneath the dial itself. …
4. Insert the emergency key into the emergency keyhole and turn it until the safe opens.

Turn the dial to the LEFT, passing N1 three times, stopping on N1 the 4th time. Turn the dial to the RIGHT passing N2 two times, stopping on N2 the 3rd time. Turn the dial to the LEFT passing N3 one time, stopping on N3 the 2nd time. Turn the dial to the RIGHT to unlock, the dial should stop between 88 and 92.

Please try resetting the lock again by following the instructions below:

1. Place lock in the open position.
2. On the back of the lock, slide the reset lever into the “up” position.
3. Insert the shackle into the lock and squeeze firmly twice to “clear” it.
4. Pull up on the shackle to open the lock.
5. Enter your new combination.

There are a handful of reasons your safe won’t open. As outlined above, it could be due to Dead batteries, lockout mode or time delay, jammed bolt work, disconnected or damaged wiring, and deactivated code.

Forgot The Combination To Your Safe? Here’s What To Do

1. Find Out Which Safe You Have. The first step that you need to take is to identify the type of safe that you have. …
2. Determine If The Safe Has A Key Override. …
3. Determine If The Safe Has A Change Key. …
4. Find A Locksmith. …
5. Provide Information About Your Safe.

To open combination locks without a code, start by pulling up on the dial and turning it clockwise until you hear the lock click. Then, check what number you’re at, add 5 to that number, and write it down. Next, set the dial to that number and turn it counterclockwise until you hear it click again.

An outdoor lock might experience rust, frost, or a physical blockage in the shackle that jams the lock closed even when you’ve entered the correct combination, resulting in a combination padlock that won’t open. Freezing temperatures can cause the lock shackle and locking mechanism to constrict, seizing up the lock.

If what you want are all possible three digit numbers with no repetition of the digits then you have 10 choices for the first digit, you have 9 choices for the 2nd digit, and you have 8 choices for the 3rd digit giving you 10x9x8 = 720 in all.

A three digit lock can have its key value between range “000” – “999”. So basically 1000 combinations Have to be tried to open the lock.

Therefore in that set of 720 Possibilities, each unique combination of three digits is represented 6 times.

Therefore in that set of 720 Possibilities, each unique combination of three digits is represented 6 times.