How do i fix error code oxc0000225?

Follow the below steps to hopefully fix the issue, no matter the cause.

1. Step 0: Create a Windows 10 Install Disk. …
2. Step 1: Run Through Windows Automatic Repair. …
3. Step 2: Run Manual SFC and Check Disk Scans. …
4. Step 3: Rebuild the BCD. …
5. Step 4: Set Your Active Partition. …
6. Step 5: Check for Faulty Hardware.

First off, error code: 0xc0000225 means Windows cannot find the System Files used for booting, aka, BCD (Boot Configuration Data). In other words, if your system files are corrupted, the disk file system has a bad configuration, or if you have faulty hardware, the 0xc0000225 error would occur.

First off, error code: 0xc0000225 means Windows cannot find the System Files used for booting, aka, BCD (Boot Configuration Data). In other words, if your system files are corrupted, the disk file system has a bad configuration, or if you have faulty hardware, the 0xc0000225 error would occur.

First off, error code: 0xc0000225 means Windows cannot find the System Files used for booting, aka, BCD (Boot Configuration Data). In other words, if your system files are corrupted, the disk file system has a bad configuration, or if you have faulty hardware, the 0xc0000225 error would occur.

For fixing this error code 0xc000025 without CD, you can Download 0xc0000225 repair tool-AOMEI Partition Assistant Standard Edition to create a bootable USB stick For booting up this computer successfully and trying to repair the boot issue in Windows PE mode.

Next, follow these steps:

1. Insert your installation media into the computer.
2. Boot to the media. …
3. Click Next on the Windows Setup menu.
4. Click “Repair your computer.”
5. Choose Troubleshoot.
6. Select “Advanced options.”
7. Pick “Command Prompt.”
8. Type Bootrec /fixmbr and press the enter key.

7 Ways to Fix the “Your PC Did Not Start Correctly” Error

1. Run the Startup Repair Tool. …
2. Boot into Safe Mode. …
3. Perform a System Restore. …
4. Check for Missing or Corrupt System Files. …
5. Repair the Boot Configuration Data. …
6. Repair the Master Boot Record. …
7. Update Windows or Delete Recent Updates. …
8. Reset Your PC.

You may encounter an error telling you “Your PC/Device needs to be repaired” if you are using Windows 10. This error usually happens when your computer is loading the operating system. Usually you will see in the error message an error code like 0x0000098, 0xc000000f, 0xc0000034, 0xc0000225, 0xc000014C, etc.

If the needed system files are missing or corrupted, the Boot Configuration file BCD is corrupted or missing some required information or you accidentally set the wrong partition as active, the 0xc0000225 error would occur, showing “your PC needs to be repaired” on your computer screen.

If the needed system files are missing or corrupted, the Boot Configuration file BCD is corrupted or missing some required information or you accidentally set the wrong partition as active, the 0xc0000225 error would occur, showing “your PC needs to be repaired” on your computer screen.

How to create a Windows 10 installation disk

1. Requirements.
2. Method 1: Use the Media Creation Tool.
3. Method 2: Download ISO and create bootable USB. Download ISO (Windows). Download ISO (macOS, Linux). Create bootable USB with Rufus.
4. How to boot with your installation disk.

To create installation media, Go to the software download website, where you’ll find step-by-step instructions. On that website, you can select a version of Windows and create your own installation media using either a USB flash drive or a DVD. To go directly to one of the versions, select one of these links: Windows 7.

Rebuild BCD in Windows 11/10

1. Boot your computer into Advanced Recovery Mode.
2. Launch Command Prompt available under Advanced Options.
3. To rebuild the BCD or Boot Configuration Data file use the command – bootrec /rebuildbcd.
4. It will scan for other operating systems and let you select the OS’s you want to add to BCD.

On the Install Windows screen, select Next > Repair your computer. On the Choose an option screen, select Troubleshoot. On the Advanced options screen, select Startup Repair. After Startup Repair, select Shutdown, then turn on your PC to see if Windows can boot properly.

1. First please run the following command line to make a copy of current BCD store database for backup purpose.
…

1. First backup your current configuration. …
2. Then type bcdedit /enum.
3. Locate which entry you want to remove.
4. Then type bcdedit /delete {ID} or bcdedit /delete {Name}

How to Repair Windows Without CD FAQ

1. Launch Startup Repair.
2. Scan Windows for errors.
3. Run BootRec commands.
4. Run System Restore.
5. Reset This PC.
6. Run System Image Recovery.
7. Reinstall Windows 10.