How do i fix error 0x80300002?

Some of the working methods to fix the error code 0x80300002 for Windows Installation are:

1. Verify the compatibility between the BIOS and the installation media.
2. Recreate all the partitions.
3. Recreate the bootable USB drive.

So you’ve got the Windows Installer Error 0x80300002. That means that The system cannot be installed on the partition you indicated because there is something wrong with the partition or the media you’re installing the system from.

How To Fix We Couldn’t Install Windows In The Location You Choose [MiniTool Tips]

1. We couldn’t install Windows in the location you choose. Please check your media drive. …
2. Method 1: remove external hardware.
3. Method 2: verify the compatibility.
4. Method 3: delete partitions.
5. Method 4: try System Restore.

The most effective fix when encountering the “Windows could not prepare the computer to boot into the next phase of installation” error is to Remove/disable any unnecessary hardware. This is especially effective in those situations where the user tries to upgrade an existing Windows installation.

How to Fix Windows Cannot Be Installed on Drive (0)

1. Method 1: Erase your drive to avoid compatibility with previous partitioning systems.
2. Method 2: Select the correct option for booting, Legacy BIOS or UEFI.
3. Method 3: Change the partitioning table from GPT to MBR (Please backup your data if any)

Learn how to convert a disk drive from MBR to GPT (GUID Partition Table) format.
…

1. Click Start, type diskmgmt. …
2. Right-click diskmgmt. …
3. Verify that the disk status is Online, else right-click and select Initialize disk.
4. If the disk is already initialized, right-click on the label on the left and click Convert to GPT Disk.

Turn on the PC and press the key that opens the boot-device selection menu for the computer, such as the Esc/F10/F12 keys. Select the option that boots the PC from the USB flash drive. Windows Setup starts. Follow the instructions to install Windows.

Note

1. Connect a USB Windows 10 UEFI install key.
2. Boot the system into the BIOS (for example, using F2 or the Delete key)
3. Locate the Boot Options Menu.
4. Set Launch CSM to Enabled. …
5. Set Boot Device Control to UEFI Only.
6. Set Boot from Storage Devices to UEFI driver first.
7. Save your changes and restart the system.

Just Go to Settings > Update & Security > Windows Update and click Check for Updates. You’ll see Feature update to Windows 11. Click Download and install. You can also use the Windows 11 Installation Assistant.

You can solve this error by Updating your hard drive’s driver. Open your Device Manager, right-click on the unallocated hard drive found under the Disk drive section. From the right-click menu, select Properties > Driver > Update. Here, follow all on-screen instructions and Restart your PC after the update.

You can convert MBR to GPT disk without data loss by using the DiskPart tool. You can also use the built-in Disk Management feature. Alternatively, you can also use an automated tool called MBR2GPT that will convert the disk from MBR to GPT without removing any files.

1. Download and launch EaseUS Partition Master on your Windows computer.
2. Right-click the MBR disk that you want to convert and choose “Convert to GPT”.
3. After that, find and click the “Execute 1 Operation” button on the toolbar and choose “Apply” to start the conversion.

As MBR is older, it’s usually paired with older Legacy BIOS systems, while GPT is found on newer UEFI systems. This means that MBR partitions have better software and hardware compatibility, though GPT is starting to catch up.

How to boot from USB Windows 10

1. Alter the BIOS sequence on your PC so your USB device is first. …
2. Install the USB device on any USB port on your PC. …
3. Restart your PC. …
4. Watch for a “Press any key to boot from external device” message on your display. …
5. Your PC should boot from your USB drive.

To reset your PC

1. Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings. …
2. Tap or click Update and recovery, and then tap or click Recovery.
3. Under Remove everything and reinstall Windows, tap or click Get started.
4. Follow the instructions on the screen.

Many a time when you reboot after a Windows 11 or Windows 10 upgrade or just tried login to your account, you might just encounter this screen which says “Preparing Windows“, this could mean that Windows 11/10 is trying to finish off something or just waiting for few files to load up so you can use your account.

Here are the steps:

1. Upon the ‘Preparing automatic repair’ window, press-and-hold Power button three times. Force to shut down the machine.
2. The system will enter the boot repair page after 2-3 times reboot.
3. Choose “Troubleshoot”, then go on to “Refresh PC or Reset PC.”

Windows 11 stuck on “Preparing Windows” screen is the most common problem during Windows Update or logging into your account. Under normal circumstances, the Preparing Windows process should not take more than 20 – 30 minutes.

From the sign-in screen

1. On the Windows sign-in screen, press and hold the Shift key while you select Power > Restart .
2. After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. …
3. After your PC restarts, you’ll see a list of options.